|
Services
Where We Build Your
Dreams |
NOS Fogger
stealth Installation. This service is to install a Nitrous Oxide
Fogger system on an F22 intake manifold. This install is designed to
be a stealth kit, meaning YOU CAN'T SEE IT ONCE INSTALLED ON THE CAR! A great way to make
some real power quick without being seen. The fuel source can be taped
into the fuel rail, or get
fuel tank fitting for full
stealth. The service comes with No parts. $300.00
Ported & Polished F22
Cylinder Head INCLUDES: porting and polishing of head only at valve
area and gasket matching only, with Racing Multi Angle Valve Job
(below)
$425.00 Note: you may add any of these
items to this package for no additional labor charges. >
Camshaft -
Single
valve springs -
Titanium
Retainers - other items may be added for additional charges
contact us with
question and comments
_
Racing F22 Multi Angle Valve Job
(INCLUDES: 3 or more angle valve job, with cleaning of head and new
valve stem seals) This totally refurbishes the head. To surface for
high compression add an extra $75.00
$249.00 Note: you may add any of these
items to this package for no additional labor charges. >
Camshaft -
Single
valve springs -
Titanium
Retainers - other items may be added for additional charges
contact us with
question and comments
_
Racing Package 1 (INCLUDES: Ported
and Polished High compression cylinder head (above), 3 angle racing
valve grind (above), ported intake manifold,
high velocity
throttle body, and our
camshaft and new
valve stem seals.
$1345.00 Note: you may add any of these
items to this package for no additional labor charges. >
Single
valve springs -
Titanium
Retainers - other items may be added for additional charges
contact us with
question and comments
Racing Package 2 - Coming Soon, email us for direct
for a price quote.
_
Ferrea Dual Valve Spring Install F22 non-vtec
(INCLUDES: This service would be for labor to cut the
spring pockets out in the head. This is necessary because of the
spring being to big for the head, yes that's rite they do not fit. We
will have a Dual Spring Kit that come with all necessary parts needed.
(coming soon)
_
Racing Bronze Valve Guide Job.
(INCLUDES: one set of
bronze guides
and labor price is on a dissembled head. We take this service to
another level ! $259.00
_
EGR intake manifold cleaning service.
Work performed: drill and tap EGR plugs
to accept AN pipe plug fitting. These EGR ports that stop up very
often on many Honda cars and F22 especially will make the car very
sluggish on take off even stall on hot days. These removable plugs
will allow You to clean these ports any time after it's serviced.
 $109.00
_
Welding: Exhaust Gas Temperature Bungs
in Header
 $59.00
please add $29.00 extra if you need 4 bungs.
_
We also offer
crankshaft
knife-edging that will reduce rotating weight and also help to cut
through the thick stuff you call oil. This means more power and faster
RPMs. We also
remove
the stock ball and clean the all the oil holes out replacing them
with an Allen head plug that is tapped into the crankshaft. Don't
trust anyone else with this, let the experienced F22 people do this
delicate procedure. After this is all done we micro polish the
journals and dynamic balance the complete assembly.
_
Balancing & Blue Printing,
Micro Polishing, Block Services - Bore and Hone Decking/Surfacing
_
Custom Built F22 Engine (Contact
us for prices)
_
Dyno Services :
Horsepower Torque
1/4 and 1/8 mile
Results
and much more...
Starting at $49.95
_
Also:
We can install any part we sell
and offer a Full Machine Shop services with any custom fabrication
work needed, Engine building, Balancing, Blueprinting, Flow-Bench and
much more...
_
Modified F22 Oil Pump
_
Throttle
Body Enlarged Ported & Polished
(all Hondas)
-
We offer Oil shedding Teflon Anti-Friction Coatings and Jet-Hot
Coatings for any part we sell or you send us. In addition to this
getting Cryogenic treatment of any part can be purchased here also.
-
Check your ECU Codes
Here
Questions ?
|